Does anyone know how to wire the power transistor (or called ignitor) and the dropping resistor,There on a separate loom that gets split at the first small ralais box (blue and grey relais) and continious into a thinker loom going al around the front of the car to the fused relais box with the green relais.
Does anyone know how to wire this easilly and why isnt there hardly anything mentioned in any guide?
Usually, the dropping resistor just plugs right in, unless you are missing one. If that is the case, you can use a DSM/Mitsubishi(lancer evo) dropping resistor. As for the ignitor, it's part of your harness and just plugs in to each other. I don't think the European has the ignitor and resistor pack on a separate harness, but I'm not sure. Post some pictures so I can help you better.
Parlez-vous francais? Ou est tu?
Well I was mistaking about the dropping resistor, that one actually plugs in the engine harness. But the igniter is wired thru the car loom, Im trying to find a pic but cant find one clear enough.Il just try to get a US UK or JDM wiring loom and see if I can use that with my stock ecu.
I dont reallyspeak french but i live pretty close 2 france