87-2hundieSep 4, 2010, 11:22 pm · #1 Hey everybody, brand new to this site pretty stoked to own a silvia s12. iv owned this thing for about 4 months now baught it off a buddy for DIRT cheap he said 250$ i gave him 240$ lol and drove it home with no plates or insuance! but yeah since iv had it i have become more into sliding it around and always looking for something to do with the car. i have TONs of plans for this pooch but for now everything pretty well stock with a ballsy ca20. for what it is right now iv got it super wrapped around corners, sick little car!
Heres some pictures from today, recently just lost my license so i can focus more on the car
sideways_s12Sep 4, 2010, 11:42 pm · #2 Bwahahahahahahahahahaha he said the ca20 was "Ballsy" hahahahahahahaha welcome and have fun sliding
SC S12Sep 4, 2010, 11:55 pm · #3 Must have bought it from the guy here locally talking about its "legendary" history...lol
(seriously there was one on CL here for 3 grand with the CA20... i wrote a letter to laugh at him...)
Welcome!
sideways_s12Sep 4, 2010, 11:58 pm · #4 was that the same guy that was pissed because bart wouldn't give him free prototype parts for the s12?
RedneckSep 5, 2010, 12:03 am · #5 This thread is not looking too promising.
SC S12Sep 5, 2010, 12:30 am · #6 yeah, i forgot to say locally as in 30minutes from my house... i dont think he is on here...
so back to welcoming the misguided person who thinks its "Ballsy" and mad tyte in the curves or whatever
VG30_S12Sep 5, 2010, 1:33 am · #8 welcome...
ill give him that, the ca20 is ballsy...
youd have to have huge ones to want to mess with one...
a tin pan alleySep 5, 2010, 1:51 am · #9 man, you guys are being douches! he loves his car, leave 'im alone
JaySep 5, 2010, 2:04 am · #10 a tin pan alleyman, you guys are being douches! he loves his car, leave 'im alone
^This
CA20E = hours spent by me bitching about it
Super wrapped around corners = Something must definitely NOT be stock....
Wilkommen
KustamogenSep 5, 2010, 6:58 am · #11 Im pretty sure he was being sarcastic lol
hotdoghogieSep 5, 2010, 7:20 am · #12 My ca20 sits mid tandedn in between two 240's. It can slide fine, can't say the same for my clutch. And getting super angle on stock suspension... I dunno about all that now. You seem like a very enthusiastic kid, welcome.
87-2hundieSep 6, 2010, 6:41 am · #13 sideways_s12Bwahahahahahahahahahaha he said the ca20 was "Ballsy" hahahahahahahaha welcome and have fun sliding
i was totally kidding about the ca being ballsy hahah and im running welded diff and chopped springs to . you guys seem pretty hostile at the moment. but anyways i cant seem to get my pictures up, any help?
87-2hundieHey everybody, brand new to this site pretty stoked to own a silvia s12. iv owned this thing for about 4 months now baught it off a buddy for DIRT cheap he said 250$ i gave him 240$ lol and drove it home with no plates or insuance! but yeah since iv had it i have become more into sliding it around and always looking for something to do with the car. i have TONs of plans for this pooch but for now everything pretty well stock with a ballsy ca20. for what it is right now iv got it super wrapped around corners, sick little car!
Heres some pictures from today, recently just lost my license so i can focus more on the car
87-2hundieHey everybody, brand new to this site pretty stoked to own a silvia s12. iv owned this thing for about 4 months now baught it off a buddy for DIRT cheap he said 250$ i gave him 240$ lol and drove it home with no plates or insuance! but yeah since iv had it i have become more into sliding it around and always looking for something to do with the car. i have TONs of plans for this pooch but for now everything pretty well stock with a ballsy ca20. for what it is right now iv got it super wrapped around corners, sick little car!
Heres some pictures from today, recently just lost my license so i can focus more on the car
JaySep 6, 2010, 7:08 am · #15 
Well there's your problem!
MMmmmmm... White notch FTW
87-2hundieSep 6, 2010, 7:18 am · #16 Jay
Well there's your problem!
MMmmmmm... White notch FTW
haha what does "FTW" mean?
kroon1caSep 6, 2010, 11:08 am · #18 To be honest the stock S12 corners pretty well. Glad you guys made a good first impression with this guy.
KustamogenSep 6, 2010, 4:04 pm · #19 your engine bays all wet.....mmmm I like wet!
sideways_s12Sep 6, 2010, 5:39 pm · #20 No hostility here it's just funny because on occasion we get newbs that think the ca20 is hot shit when indeed it's not besides I was joking
JaySep 6, 2010, 6:06 pm · #21 sideways_s12No hostility here it's just funny because on occasion we get newbs that think the ca20 is hot shit when indeed it's not besides I was joking
Remember
That one guy smoked mustang 302's with his CA20E
Riiiiiight
87-2hundieSep 6, 2010, 6:20 pm · #22 JayRemember
That one guy smoked mustang 302's with his CA20E
Riiiiiight
serious!! a little 4 cylie beat a mustange?
So i could'nt get outside today due to it raining wet stuff from the sky. My swap plan is a CAdet, i would like to due a turn key swap but we'll see what happends. could anybody give me a rough price on turn key CAdet swap? and also i need driver side quarter pannel if anybodys got some extras?
sam31183Sep 6, 2010, 7:17 pm · #23 you need to update your location so we know wtf you are.
87-2hundieSep 8, 2010, 5:19 am · #24
Hey guys this is gunna be a slow build off the start, i just found a job so once i start getting money i will be doing some mods. I was thinking first off getting my engine, tranny, harness, ecu, turbo and all the piping and then going from there. Anybody have any suggestions or any pointers that would be awsome help, thanks everyone
LeegamerSep 8, 2010, 6:34 pm · #25 Looks like a pretty clean notch that just needs some TLC.
Check out the CA18DET section for tons of good ole' info on the swap.
VG30_S12Sep 9, 2010, 3:54 am · #26 ment no disrespect to ya guy, its just my personal luck with CA20s, has been well, no bueno... not to mention that compared to other swappable motors, its performance is less than stellar...
RedneckSep 9, 2010, 7:50 am · #27 Damn that notch is still bangin. It even looks like it has the elusive mk2 mudflaps that are all the rage.
87-2hundieSep 11, 2010, 12:23 am · #28 sideways_s12Sep 11, 2010, 12:37 am · #29 VG30_S12ment no disrespect to ya guy, its just my personal luck with CA20s, has been well, no bueno... not to mention that compared to other swappable motors, its performance is less than stellar...
This is offtopic as hell but your avatar just had me rolling for like 15 mins lmao!
JayRemember
That one guy smoked mustang 302's with his CA20E
Riiiiiight
And yeah I remember that tool lol he was almost as bad as jeffwins
87-2hundieSep 11, 2010, 12:46 am · #30 sideways_s12This is offtopic as hell but your avatar just had me rolling for like 15 mins lmao!
And yeah I remember that tool lol he was almost as bad as jeffwins
sideways is the avatar like my profile picture??
KustamogenSep 11, 2010, 12:46 am · #31 least you got your strut assembly off the spindle ok!
mine BOTH stripped lol
87-2hundieSep 11, 2010, 12:48 am · #32 Kustamogenleast you got your strut assembly off the spindle ok!
mine BOTH stripped lol
brutal! yea i though forsure mine was gunna fuck me around only the last bolt was pretty seized but soon as i got it the strut just popped lose just like that
KustamogenSep 11, 2010, 1:01 am · #33 Im glad when I stripped a flywheel bolt that I bought a stripped bolt remover kit haha.....got my struts off with one of those right away.....but if I didnt have them I woulda been pissed and likely swearing at old people and indians on the way to Canadian Tire
sideways_s12Sep 12, 2010, 3:10 am · #34 87-2hundie on 12:46:13 AM / 11-Sep-10sideways is the avatar like my profile picture??
Sorry i was talking about vg30
87-2hundieSep 28, 2010, 12:20 am · #35 sideways_s12Sep 28, 2010, 12:33 am · #36 eww yuck budweiser blah lol and the vi depends on the regulations you have looks like your in canada so i wouls has kustamugen i think that's how you spell it.....
87-2hundieSep 28, 2010, 12:37 am · #37 hahah bud my brand next to wildkitty, what the eff is "kustamugen" lol
MaxpowSep 28, 2010, 2:33 am · #38 87-2hundie on 12:37:03 AM / 28-Sep-10hahah bud my brand next to wildkitty, what the eff is "kustamugen" lol
He was saying to ask Kustamogen the member up there ^^^^ about local regulations.
87-2hundieOct 2, 2010, 8:10 pm · #39 87-2hundieOct 5, 2010, 6:08 am · #40 got some of the boys over to give me hand with the motor, didnt have much patience with waiting for my dads buddy with a engine hoist sooo just pulled er buy hand. main objective for today was to get the motor out and we succeded on that one. so tomorrow im going to focus on sex'in up the bay with a lil elbow grease.. and i need some help on how to get the wiper motor off(passenger side top corner on the firewall) is there a bolt of somesort on the inside of the car?
i know its reallly dirty dirt snake in dar
Post Merge: 06:34:20 AM / 05-Oct-10
has anyone heard of and or used any godspeed lower control arms off ebay??....
http://cgi.ebay.com/ebaymotors/godspeed-89-90-91-92-240sx-s13-front-lower-control-arm-_W0QQcmdZViewItemQQhashZitem1e5e648418QQitemZ130432664600QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories87-2hundieOct 8, 2010, 4:36 am · #43 87-2hundieOct 26, 2010, 1:38 am · #44 heres a gruby teaser pic. picked up the front kit for 20 beans, have a few cracks in it but i intend to chop it to make it shorter to fit and line up on the fenders.
still waiting on a bunch of shit. soon as it nice out im gunna tackel the rust spots like on the back passenger quarter pannel under that mud guard it rusted through im just gunna fix with some fiber glass, also there is a rust hole on passenger floor.
ArroOct 26, 2010, 1:44 am · #45 I'm just gonna be honest, and not hatin' on you, but I think it's totally wrong for the rest of the body lines. Our cars are very angular, and this is way "organic" looking. Then again, I don't like those style front ends on even more modern cars.
But that's just my opinion of course.
87-2hundieOct 26, 2010, 1:51 am · #46 i totally agree i thinking about just staring at it and havent stoped thinking if i should use it or not. but i wasnt going to mod any of the car to fit that front kit im just gunna hack up the kit to make it work see how it is. and i personaly dont like how it come up on the bottom where the intercooler hole is, but we'll see
87-2hundieOct 26, 2010, 2:01 am · #48 aiight you guys already convinced me. ANTI-RICE
DeezusOct 27, 2010, 6:13 am · #49 I vote if that bumper goes on.
Ban time.
ArroOct 27, 2010, 6:16 am · #50 hahah smart man. Sell it to a honduh kid.
that was a bietch gettin that off!
head and pistons were in better shape then i would have thought! lucky me i still have a v.i. on my car!!! do you think i could do my engine swap and still pass me vehicle inspection? does anybody have any ideas??
.....wooooow!
