[CO] Ca20e/Ca18et Parts TONS!

Started by sideways_s12 · Mar 9, 2011 · 19postsSMF 2010–26

sideways_s12Mar 9, 2011, 12:05 pm · #1

nismo_200sx on 03:55:34 PM / 08-Mar-11i dont mean to be a dick or anything lol i dont want the springs so ill just sell you the full head for 80 with everything cams etc its all torqued to spec and assembled with redline assembly lube the springs and perches are already in the head you will have to take them out cause i wont im just gonna sell it as one piece so when you get the head you can just take the perches out and throw the springs away or something

lol your not understanding me I'm talking about the 240sx lowering springs wanted to know if the perches could be seperate or are you trying to sell it all as a set. All i need is the perches the silver things that are still wrapped next to the springs in the third pic....

nismo_200sxMar 9, 2011, 12:07 pm · #2

ill sell you the entire springs for $50

sideways_s12Mar 9, 2011, 5:51 pm · #3

What's your paypal for the springs please sir.....

Post Merge: 04:54:10 PM / 09-Mar-11

What's the specs on the springs as well

Post Merge: 05:57:07 PM / 09-Mar-11

Is that 50shipped

nismo_200sxMar 10, 2011, 1:56 pm · #4

my paypal is [email removed]
50 plus shipping. shipping to your zip code is $18.15 so like $60 good?

Post Merge: 01:59:12 PM / 10-Mar-11

sideways_s12Mar 10, 2011, 7:33 pm · #5

60 shipped sounds awesome thanks I will let you know when the money goes out it will be goin out this week.for sure

nismo_200sxMar 10, 2011, 8:20 pm · #6

ok just let me know

sideways_s12Mar 12, 2011, 1:07 pm · #7

Money has been sent sir...It's in Kendra's name just so you know.

JuneBugMar 12, 2011, 2:10 pm · #8

nismo_200sx on 07:40:43 PM / 06-Mar-11
z32 vg30dett turbo mani

z32 300zx t3 garrett turbo no shaft play

Just to let you know that's a Z31 VG30ET manifold. Post it on z31performance.com and it will sell quickly.
The turbo is also from a z31 however it is a t25 not a t3. It does use a t3 flange however so I can understand the confusion. Not many Z guys are going to want it. You could try to sell it locally to someone with a Honda.
Good luck and hopefully this helps you sell these.

sideways_s12Mar 19, 2011, 6:25 pm · #9

hey the other 3.15 has been sent send springs plz....

TeamMiR_S12Jan 23, 2012, 8:57 pm · #10

I know this might be old, but do you still have that engine?

Post Merge: 09:00:20 PM / 23-Jan-12

by any chance do you have ca18et piston and rings? or the bottom block?

nismo_200sxJan 25, 2012, 11:27 am · #11

yes i still have the engine.

sideways_s12Jan 26, 2012, 10:34 pm · #12

What about the head? Ca20e

nismo_200sxJan 29, 2012, 7:33 pm · #13

yes still have the head too. it's port matched and polished with a 3 angle valve job

sideways_s12Feb 2, 2012, 11:42 pm · #14

How much shipped to vegas 89117

nismo_200sxFeb 3, 2012, 11:15 am · #15

it's gonna be pretty hefty shipping. somewhere in odds around 70-110 bucks for ground

TeamMiR_S12Feb 7, 2012, 5:58 pm · #16

how much for the engine shipped to 99301?

TaylorrehmOct 6, 2012, 3:47 am · #17

Will buy the ca20e block and ca18et head combo. zip code is 97132, does it have the factory crank shaft from the ca20e? thanks. Let me know if it is still for sale, because then i'll buy it.

JonBOct 6, 2012, 10:51 am · #18

What are you hoping to get for the turbo?

nismo_200sxOct 7, 2012, 2:55 pm · #19

Taylorrehm on 03:47:55 AM / 06-Oct-12Will buy the ca20e block and ca18et head combo. zip code is 97132, does it have the factory crank shaft from the ca20e? thanks. Let me know if it is still for sale, because then i'll buy it.

shipping is $150 and it has to be to a business address. offer me something for the engine setup. yes it has the factory ca20e crank with acl race bearings, plastigauged perfect clearance.
Post Merge

JonB on 10:51:43 AM / 06-Oct-12What are you hoping to get for the turbo?

z31 turbo is gone but i have 2 audi 2000 turbo's it's like a 16g it's t25 flange make an offer.