Everything pictured is for sale, prices are negociable especially if you buy more than one part. Most of this stuff will end in the trash by the end of the month if nobody want them so don't be afraid to lowball me.



Rear mudflaps [pending]


Sideskirt [pending]

Rear window coupe interior trim 10$ each or both for 17$
headlight trim set 10$

Coupe rear side trim 10$ each or both for 17$

Coupe central brake lamp 10$
Complete KA24DE in parts (not pictured: crankshaft and block)

KA24DE Crank pulley 10$ idler gear 10$
KA24DE Valve cover 25$ each
Complete KA24DE head with valves/spring and camshaft caps 50$
KA24DE fuel rail with injectors 30$
KA24DE accessory brackets 5$ each
KA24DE front upper timing cover 10$ each
KA24DE starter 25$
KA24DE alternator 25$
KA24DE oil pan 20$
KA24DE pcv bloc 5$

Gutted KA24DE intake manifold 50$ (egr deleted, IACV welded shut, swirl control valve deleted)
KA24DE S14 camshaft set (232/232 duration) 20$ each or 35$ for both
KA24DE S13 camshaft set (240/248 duration) 20$ for the intake camshaft 30$ for the exhaust one.
Dirty door panel 5$
Oil nozzle for oiling/cooling the liner/under piston on a KA24DE engine. 5$ the set or 2$ each
S12 hatchback rear whiper motor 15$

Passenger side power mirror [pending]

Headlight frame assy 15$ each or 25$ for both
S12 driver door power window linkage/motor 25$
S12 passenger door power window linkage/motor 25$


MKII grill and corner lamp [pending]


S12 coupe rear seat 20$
windshield trim 5$





S12 XE wheels [pending]


KA24E fully dressed 80$ or part out
BNIB AEM uego 120$
Turbo oil feed with .060'' restrictor (perfect for ball bearing turbo) 10$
School bus horn 5$
Turbo oil drain hose with AN fitting 10$
S12 heater fan motor 15$
BNIB glowshift mechanical boost/vac gauge (39hg/in - 30psi) 20$


intercooler, core is 11'' X 23.5'' X 3''. Has some damage but does not leak 30$

KA24DE turbo manifold with t28 flange. 50$
Emusa wastegate, with 8psi spring insied and 1psi spring. Tial springs fit in those. 10$

S13 3'' downpipe with a bung welded and a flex pipe. Universal 5 bolts pattern on the turbo side. 40$

Holset HY35. Has about 60k miles to it. no shaft play, very good condition. Come with factory wastegate and all it hardware. The wastegate was removed because I was planning to weld it factory one shut. I never did it and kept the stock wastegate in case.
175$

KA24DE front timing cover with oil pump and pick up tube 10$


Anything on this picture is 3$ or 2$ each if you buy two or more.
Steering column switch 15$ each or 25$ for both
Relay 3$ each
Driver door power window switch 10$
Browse › Marketplace ›For sale
[Qc, Can] * UPDATED WITH PICS* Parts for sale (ka24e/de, s12, turbo parts, etc.)
Would you brake up the vg side skirts? ?
Unless I can find someone interested in the rest of the kit, not really.
Lol well if that happens lmk but if I come up with the 200 ill take it cuz I know colin wants the mud flaps and im sure people want the lip
Ok, if you can find someone willing to buy the front lip i'll split it.
if I split the SE kit I'll split the price that way:
70$ for the mudflaps (night_s12 have mentionned interest in them, if he's okay with the price)
70$ for the sideskirt
60$ for the front lip.
Let me know what you think and I'll write your dibs on the sideskirt in the original post.
Ya im good with that ill help look for a buyer.
just wondering, how much would shipping for the front lip be to 91977?
I'll check a few quotes online from guesstimated dimensions for the box and different shipping method (just check canada post and.. you don't wanna know their quote :P ). But I think it'll be expensive. I'll try to find the best price. So far the best I got is 143$ CAD for shipping only...
Oh bawls that's an arm and half a leg! I think I'll pass on that then lol
Once I get back home I'll take some real measurement, if it end up being cheaper than that i'll let you know if you want..but i don't think it'll be under 80$..I'm on eastern canada and you're in south/west US lol
Its 55. Flat rate from Canada to us I shipped a fender through there
ship by what mean? I guessed a 48X15X15 inches box with a weight of 3kg.. it ended up above 400$ with post canada from there online quote tool..that's all I can do from the boat. I'll get something more acurate once I'm home.
143$ was with purolator, which is the shipping company that deliver the ups packages in my area. Same box lenght and weight used for the quote.
rifelman1993 on 05:50:54 PM / 16-Apr-13Its 55. Flat rate from Canada to us I shipped a fender through therei call bull on this. cheapest way i could find to ship a fender to Canada was about $400. $55 is believable if you use Greyhound and send it within the US
I sent through usps
Post Merge
I sent through usps
USPS is in the state? (stand from United States Postal Services), we have Canada Post here instead.
It was around 450$ with Canada Post for a box 48X15X15 inches with a weight of 3kg (which is what I estimated for the box).
Purolator (which deliver ups packages here) is 143$.
So far it is the best I have found, unless you are okay with me hacking the lip in 3 differents parts and ship it for 55$..but I highly doubt that.
The rear mudguard will probably decent for shipping, it's really the lenght of the sideskirt and the lip that are bumping the shipping up. That's a bit why I don't have too much fate in selling the kit in parts. I live far and across a border from most of you, it suck for shipping big parts, but that's how it is.
Fender doesn't fit in a flat rate box, and neither does an SE lip unless its cut up.(no gusta cut up lip lol)
Colonel Gustard on 03:29:54 PM / 17-Apr-13Fender doesn't fit in a flat rate box, and neither does an SE lip unless its cut up.(no gusta cut up lip lol)
I'll include a tube of superglue? :)
Lol no they have a flat rate shipping to canada.
rifelman1993 on 04:07:08 PM / 17-Apr-13Lol no they have a flat rate shipping to canada.
Well seems like I won't convince you, check for yourself the quote for a box 48X15X15 inches with a weight of 3kg from g0k 1p0 to 91977.
Looking at it online is never the same as going in. And im just sayin I did ship a fender for that much and she told me shipping to canada has a flat rate shipping.... maybe its different shipping from there to here idk. Im just sayin what I did
i shipped a turbo spoiler to canada and it cost me 110 through ups about the same size as a lip but a lil heavier
So is the french voice warning a man or woman?
I want those fucking guards!!!!!
turbo-s12 on 07:19:00 PM / 17-Apr-13i shipped a turbo spoiler to canada and it cost me 110 through ups about the same size as a lip but a lil heavier
110$ sound possible, I'll have to check myself once I'm off the ship. Right now all I can do is online quote. Maybe the box will be smaller than what I think.
IggyEGuana on 11:54:38 PM / 17-Apr-13So is the french voice warning a man or woman?
Woman ;)
She like to say that your key is in her ignition! It literally turn her on!
bump because I have updated the first post with pictures! Check this stuff out I need to make room!
You know what I want..
I think I found someone for the lip, which mean if you and rifelman agree with the shipping quotes they are your. I'll send the quotes later this week as I'll be away for a few days.
Sounds awesome man! Did you ever find a flap to go with the empty pod?
Just lmk how much it will be. I will have the miney at the end of may if thats ok lol I have to take a unexpected trip to montan this friday and rent a car so theres 600 $ waisted lol
Keen on the whole lip kit if it's not all sold. Shipping estimate to New Zealand, 3010?
rifelman1993 on 02:17:58 AM / 29-Apr-13Just lmk how much it will be. I will have the miney at the end of may if thats ok lol I have to take a unexpected trip to montan this friday and rent a car so theres 600 $ waisted lol
I'll try to get a quote for you today if not that'll be in a few days. But I'll prefer if you could pay for them soon, I have peoples waiting for the front lip and mudflaps but I wanna make sure I have the cash for all the parts before shipping them out. Reason why is I don't want to be stuck with one part of the kit.
Right now I have like 4 persons interested in the whole ki lol.
Well I need to know how much total before I can figure it out. But if people want the whole kit its up to you in the end.
Quote sent to night_s12 and rifelman. Check your pm!
spiderwebfx on 02:41:04 AM / 29-Apr-13Keen on the whole lip kit if it's not all sold. Shipping estimate to New Zealand, 3010?
I have already a good waiting list for the kit if it sell as a whole, I've put your name on that list, if it goes down to you I'll let you know!
How much for the headlight trim set, and the motor mount brackets off the ka24e with shipping too 85021?
Much appreciated
All brackets? I'm not sure if there is all the brackets are in there, I'll have to check. I'll send you a quote shortly.
Not all brackets just left,and right motor mount brackets
Hey I already got a hold of brackets but do u still have the headlight trim?
text me or email me i want back seats asap so i wont have to sell the non baby friendly project lol [phone removed] ask for izaya or [email removed]
Rotary it lookslike u have a hatch well he has a notch. Seats do not work together
Yea, how much for the trim shiped to 85021
mikeys12notch on 03:02:37 AM / 19-May-13Yea, how much for the trim shiped to 85021
BTW I checked and I have the accessories bracket, I have no spare engine mount bracket. I'll get you a quote on the headlight trim tomorrow!
rifelman1993 on 11:58:22 PM / 18-May-13Rotary it lookslike u have a hatch well he has a notch. Seats do not work together
Like rifelman said, the notch seat does not recline like on the hatch. The lower section is probably the same, but the upper half won't work for you.
Cool man
where about in the r u, i'm in ONT cuz i mite have a friend pick them up, and i have them meet me with the part
Post Merge
i went the hole lip kit for my S12
Pmed
@ rifle no i have a coupe im building as well i still want back seats for it so my wife can drive it with our son
How much for all the seats belts and hardware with them
PM sent