so i wanted one that was louder then the setup i had and i found this one... man this thing is huge......and adjustable so i should be able to use this with no worry....
_________________
bart
'86 INTERCOOLED Turbo
1/4 mile: 14.964 @93.02mph
CEO of:
"Barts Parts Incorporated"
http://geocities.com/bartc_j
http://members.cardomain.com/bartc_2
Sweet!!!!!!!!!!
_________________
Keith
'84 S12 Turbo
'95 A32
is that an atmospheric one ? how much was it ? it looks like it will be loud icon_smile.gif
_________________
uk s12 ca18et
looks like a giant whistle to me!! icon_biggrin.gif
ya its a atmosphere dump one... it onlt cost me 80 bucks plus shipping.....i'll know soon how well it works out
_________________
bart
'86 INTERCOOLED Turbo
1/4 mile: 14.964 @93.02mph
CEO of:
"Barts Parts Incorporated"
http://geocities.com/bartc_j
http://members.cardomain.com/bartc_2
very similar to the turbo XS design I have seen before. there is a WRX driving around campus with the XS bov on his car. Sounds very very nice. Loud as all get-out.
_________________
Jeff Hester
1986 200sx 2.0L
1967 El Camino 402ci
well i got the bov in and man the thing is loud and doesnt leak at all.... the only thing i had to do was to cut about 3coils off the spring and it works perfectly
_________________
bart
'86 INTERCOOLED Turbo
1/4 mile: 14.964 @93.02mph
CEO of:
"Barts Parts Incorporated"
http://geocities.com/bartc_j
http://members.cardomain.com/bartc_2
did it come with a flange to weld to the ic pipe? (i imagine it did)
_________________
Jeff Hester
1986 200sx 2.0L
1967 El Camino 402ci
its really not a flange but rather just a piece 1inch wide steel that you weld to the pipe and then that slips into the bottom of the bov and is secured with some screws..
_________________
bart
'86 INTERCOOLED Turbo
1/4 mile: 14.964 @93.02mph
CEO of:
"Barts Parts Incorporated"
http://geocities.com/bartc_j
http://members.cardomain.com/bartc_2
How come you had to cut the spring? Was the spring to stiff and not 'dumping'?
_________________
'84 Nissan Sunny 1.3
'87 Nissan Silvia ZX Turbo
'88 Nissan Silvia ZX Turbo
'93 Rover 216 Cabriolet Convertible
All of them RED!
ya the spring was way tight so i cut 3coils off and that gave me enough adjustability to get it to blow off
_________________
bart
'86 INTERCOOLED Turbo
1/4 mile: 14.964 @93.02mph
CEO of:
"Barts Parts Incorporated"
http://geocities.com/bartc_j
http://members.cardomain.com/bartc_2
I think I may have to do the same with my Blitz Super Sound BOV.
I think they are adjustable at above 1psi..... not sure tho.
_________________
'84 Nissan Sunny 1.3
'87 Nissan Silvia ZX Turbo
'88 Nissan Silvia ZX Turbo
'93 Rover 216 Cabriolet Convertible
All of them RED!
ya i adjusted it , but these bov are rated to over 45psi and out of the small t2 we have even 14psi isnt enoughtomake it vent smoothly.. it vented but a more putter vent rather then a nice psshhht
_________________
bart
'86 INTERCOOLED Turbo
1/4 mile: 14.964 @93.02mph
CEO of:
"Barts Parts Incorporated"
http://geocities.com/bartc_j
http://members.cardomain.com/bartc_2
wow 45 psi rating? rad man.... oh and how is the fuel rail and regulator project coming, bart? I was looking on n12turbo.com and I'm was thinking... "why don't we have aftermarket support like that?" i mean these guys have companies that make parts for that dinky e15 turbo and we have what... like nothing out there, it's not fair they're even into the 11's... i wish we had companies that had stroker kits for us and intake manis and fuel upgrades... then we'd be able to smoke mostly anything out there! so much potential in the ca18et yet there is that stock fuel system that's holding the motor back.
_________________
CA18ET with K&N Filter and JoeP MBC set at 8lbs...the rest is all STOCK 2thumbs.gif
Japanese + Turbo + Rear-wheel drive = Mucho sexy sexy! <- Pichulon's Law 2003 "Big Book of New Yet Old Hotness"
http://www.xxpichulonxxlair.5u.com
well i stil need to find a nice cheap fpr and then its done... now as far as aftermarket.... it will take people like us that love this car too modify it to the best we can from the help of those who actually design stuff for our car and then when we have enough attention from others and people(mags, racers, etc) see the poterntial of the car we willl have aftermarket it may just take a few more years... personally i dont mind waiting since me and all of us here right now will always be the pioneers of this car getting fame...
_________________
bart
'86 INTERCOOLED Turbo
1/4 mile: 14.964 @93.02mph
CEO of:
"Barts Parts Incorporated"
http://geocities.com/bartc_j
http://members.cardomain.com/bartc_2
I have just instaled a BOV just like u and I'm curise What soud do u get. A litle whisle or jus low psss. And other thing toes it work with a litle delay or instantly??
_________________
ChEsTeR icon_biggrin.gif
Silvia 88 CA18ETi Nissan
http://members.cardomain.com/chester_000
pfft. damn ET's.
_________________
Geoff Golda
1986 200sx Notchback, CA20E
i get a nice ppppsssssssssttttttt if you are getting a surging sound then your spring is to tight so loosen the top of the bov or cut a coil off the spring
_________________
bart
'86 INTERCOOLED Turbo
1/4 mile: 14.964 @93.02mph
CEO of:
"Barts Parts Incorporated"
http://geocities.com/bartc_j
http://members.cardomain.com/bartc_2