Aug 25, 2007, 4:31 am · #1
Any body know how to wire up a dsm dropping resister onto the ca18de harness for the injectors? I've looked at how the dropping resister is designed and came up with one possibility. There are 5 wires from the dsm resistor. One goes directly in the middle of the resistor and then 4 wires comes out from the resistor. I believe the one in the middle which is the red wire is the positive from the ecu which then splits into 4 wires going to the injectors. The ca18de harness also has the same design but no resistor built in. Can anyone shine some light on this, Thanks.