so i got this from pep boys, its a universal heater hose that fits instead of the factory nissan part
this hose costed me $12, instead of nissans $22
you simply need to cut about an inch from the non flared end and about 1/2" from the flared end to make it fit like mine
the flared end is slightly small for the bung on the valve cover, stretch to fit and use a hose clamp
dayco 86099
NAPA sells rubber line like that for super cheap
line that small would be 1.25 per foot
napa also has steel braided line for almost as cheap
you're gonna want hoe that can withstand anything that is petroleum based. otherwise it'll deteriorate really quickly. I used some hose i had available, and a GM 90* pcv elbow from autozone. then 4 hose clamps. it looked decent, and functioned fine.
Jsvob03 you're gonna want hoe that can withstand anything that is petroleum based. otherwise it'll deteriorate really quickly. I used some hose i had available, and a GM 90* pcv elbow from autozone. then 4 hose clamps. it looked decent, and functioned fine.
This just saved my ass. My hose was so brittle it fell apart the second I touched it. This part is under $7.00 on rockauto.com