date not saved · #1
Im about to get my hands on a set of non-leather mint condition RS13 front seats, and Im woundering if they fit, and what has to modified to mount them.
Browse › Tech ›Visual mods and audio
RS13 seats, do they fit the S12?
This thread was saved without dates. "Around Jun 2004" is estimated from neighbouring threads.
date not saved · #2
my 89 coupe seats don't fit...only one hole lines up. so I think you'll have to go for the '91+ seats.
Hydafs S12 has S13 seats and he said when he put them in the front two holes lines up perfect and he just needed to drill holes for the rear. so he may have used seats from a '91+. another member has confirmed that 89 seats don't line up.
date not saved · #3
has any one tried just removing the s13 seats off the sliders and seeing if they will bolt up to our stock sliders
date not saved · #4
tried.
they won't.
the S12 sliders bolt right onto the bottom of the seat. the S13 ones bolt onto the sides of the brackets on the S13 seats.
my dad and I are working on mounting brackets to bolt onto the side brackets of the S13 seats.
date not saved · #5
Darn.. the seats I can get are from a -89, so you need to make 2 new holes for each side of the seat? (4 per seat / 8 total) to get them in place?
date not saved · #6
3 per seat.
one hole works...one of the front ones.
the other front one...to make it work you have to bend the rail
date not saved · #7
will bending the rail result in a problem when changing the possition of the chair?
(Im ~190cm tall, so need the travel of the seat :P)
date not saved · #8
all seats from 89 to 94 rs13 in sweden has the same mountingpoints ;-)
date not saved · #9
OMG its not true! :>
YES!!
The seats in my two S12s are worthless, my back hurts after just 100km of casual driving... Im going to lit them on fire or something :P
date not saved · #10
Most people dont like the 89 rs13 seats to beacuse of the flat back (swe inget ställbart svankstöd) but i like it :-)
date not saved · #11
I hate the adjustable "svank stödet" in the S12, it makes my back hurt eaven faster...
So Il go look for some nice RS13 seats.. hehe
Bought two nice and comfortable Nissan RS13 -89 sport seats. Will try to get them fitted this weekend.
date not saved · #12
all s13 seats, from 89-94 are bolted in at the exact same location. try the z31 seats maybe.
date not saved · #13
Is there anythin wrong with drillin new holes>?>
Quite easy to do that...
date not saved · #14
Rules for Queensland Transport are if you do that you have to have square plates of a certain size and use high tensile bolts of a specified grade, 9just can 't remember exact numbers), of course each state has their own rules and Qld is fairly lenient compared to the southern states. I have R33 skyline GTS-T seats in my s12. The front two mounting bracket holes matched the s12 ones. For the back I changed the location of the inside brackets slightly i.e. cut them off and welded them), so they bolt up to the seat belt stalk mounting bolts, (The R33 seats have the seat belt stalks on the seat. So I went and got some ford laser 91 stalks and belts from a u-pull wreckers, the stalks are the same size as the R33 ones, he he I didn't tell the Transport people that as they wouldn't know any different anyway). So I only drilled one new hole for each seat and used a plate and a high tensile bolt for each.