This thread was saved without dates. "Around Jul 2004" is estimated from neighbouring threads.
AFter much searching in the archives and stuff like that i cant find anything about my SE V6. I also cant find a 3" MAF adapter for my car i was told RX-7 or MX3 will fit perfectly but what year and where in the hell can i find it. Also, the throttle body i cant find that either man im havin a hard time findin stuff for my car. Any help would be greatly appreiciated. Thx :honda:
Throttle Body...local junkyards..
Maf Adapter...I BELIEVE the 91-99 (as its listed anyhow) 200SentraX (b14) 200sx adapter works..im pretty sure its what i got! no guarentees..
I got an RX-7 MAF adapter off of eBay. Just watch out, a lot of them come with cone filters included, and some of those cone filters are so crappy you wouldn't want them on your car for even a minute. But you can alwasy just toss the filter and use the adapter and a decent filter. They're usually no more than $25.
About the TB, how do i know if its the right one, and how do i know if its going to fit my car, im not to good with idenifying stuff. Also when you searched ebay for the Rx-7 MAF Adapter what exactly did u type in for the search because ive tried a few diffent searches and havent come up with anything. THx
No one has any more advice for me....damn
I have some throttle bodies. $55.00
well it was awhile ago but I think I typed something like "Mazda cone filter adapter"
Crowbar, what kind of throttle body is it? Of course it will fit my car....right lol, will i help the performance of the car...o and what kind of condition is it in. Post back and maybe we can do some business.
the throttle bodies are out of the S13 240SX with the KA24E engine.. our stock throttle bodies have a diameter of like 50mm and the KA one is 60mm,.. its a direct bolt on, but you may have to swap over the lever things for the throttle cable..
these might not look exactly like the ones crowbar has.. but this is the one i put on my car..
Crowbar, what kind of throttle body is it? Of course it will fit my car....right lol, will i help the performance of the car...o and what kind of condition is it in. Post back and maybe we can do some business.
for the perfromance.. don't know if ya know but.. make shure ya port the intake manifold to match the increase in tb size! :D or else the upgrage was actually a downgrade :wtf:
These are from KA24e engines but not the ones with the top mounted water hoses. These have the hoses on the bottom and look stock. They have cruise control. Porting is optional. The difference in TB and opening is minimal.
These are from KA24e engines but not the ones with the top mounted water hoses. These have the hoses on the bottom and look stock. They have cruise control. Porting is optional. The difference in TB and opening is minimal.
yeah.. mine is the kind with the top hoses.. but i just bypassed the coolant lines and took care of that problem,.. i also did port match the throttle body and intake manifold (since i had everything apart anyways)
I have one with the water jacket thing on top. I cut it off with a hack saw and used a file to make it look factory again.