date not saved · #1
http://memimage.cardomain.net/member_images/3/web/291000-291999/291681_123_full.jpg
Planning to get s13 sway bars with tension rods with these. U'll see. I need randy's advice sor this project later after christmas.
Browse › Tech ›Brakes, suspension and wheels
My s14 arms
This thread was saved without dates. "Around Apr 2005" is estimated from neighbouring threads.
date not saved · #2
I take it most S13 stuff fits on S12s? What are the benifits of these control arms over factory?
date not saved · #3
check randy's out.
But i'm going with s13 stuff.
date not saved · #4
Make shure to cut off the lock stops on the arms. :) Nice to see someone else doing this swap. I'll be here for ya:)
date not saved · #5
I take it most S13 stuff fits on S12s? What are the benifits of these control arms over factory?
Wider track. Also if you use S14 arms with the stock balljoint in them you can use S14/S15 or R32 uprights with S14 coilovers or S13 ones with the holes drilled out and have 5 stud front hubs. To do this on S13 arms u need R32 or S14 ball joints. Oh yeah S14s are wider again than S13s.
PS: Not sure if this is true for USDM S14s, oz S14/15s it is tho.