date not saved · #1
will this cam work with my S-12 V6 (VG30E) ?
http://www.zcarparts.com/store/merchant.mvc?Screen=PROD&Product_Code=10-2021&Category_Code=PEM01
$170 cam?
This thread was saved without dates. "Around May 2005" is estimated from neighbouring threads.
date not saved · #2
Yes. You will want to install new lifters and new valves springs as well, at the very least. New rocker arms are preferred, but not necessary. So don't forget those costs as well.
date not saved · #3
Lift(In/Ex): .427/.427. Duration(In/Ex): 270/270.
Note: Reground on Genuine Nissan Cams, sold in pairs on an exchange basis only. Your old cams must be returned to us in fully rebuildable condition. Warranty on camshaft requires use of new rocker arms, proper springs, proper lifters, and proper professional installation. Looks like if you're doing it yourself don't count on a warranty.
date not saved · #4
and isnt that $170 per cam?? i sent Colt Cams an email and they told me that for around $200ish (it was a little more but i cant remember the exact price) that they would do BOTH cams,.. and i bet you could even get them to the same specs as these ones
date not saved · #5
ya if you have the down time crane does a great job....
date not saved · #6
and isnt that $170 per cam??
I was wondering the same, but it doesn't state anywhere that the price is per cam. ??? I had my custom cams ground by Elgin Cams, and they did it for just over $200.
date not saved · #7
ok.. i just called them up, and they said $169.95 is for the pair,.. BUT you have to send them your camshafts first and then they regrind yours and send them back to you
date not saved · #8
so your not getting new ones your getting yours modded.
i thought the S12 V6 only had one cam? SOHC
date not saved · #9
Per bank. ;-)
date not saved · #10
so your not getting new ones your getting yours modded.
i thought the S12 V6 only had one cam? SOHC
like CU Zcar said.. it is a V6,.. meaning the engine is in the shape of a V, which 3 cylinders one each side, on top of the block on each side are the cylinder heads, and each cylinder head has 1 cam
now if this were an inline-6, all the cylinders would be in a row, so if it were a SOHC then it would only have 1 cam..
here is a pic of our VG30E that i took when i was tearing it apart
http://memimage.cardomain.net/member_images/9/web/237000-237999/237018_125_full.jpg
date not saved · #11
Now i under stand. :D