Injectors

Started by Jon · Jul 22, 2005 · 12postsInvision 2005–09

JonJul 22, 2005, 2:28 am · #1

Can anyone confirm that FJ NA and Turbo engines use the same injectors??
One of mine (FJ20ET) has broken the hard plastic base piece and is leaking.
Has anyone upgraded their injectors and have a spare lying around in their garage???
Many thanks
Jon

200SX-TJul 22, 2005, 3:03 am · #2

I am not sure, but here is a set of 4 injectors on ebay for real cheap, and they are located in Australia. [URL=http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=4563127022&category=102336&ssPageName=WDVW&rd=1]Here

VEGIEJul 22, 2005, 3:48 am · #3

NA is 275cc (green?)
Turbo is 325cc(whitish)

im pretty sure thats right...
i may have a spare set floating around. what broke? the injector of the black mounting block?

JonJul 22, 2005, 11:06 am · #4

The black mounting block is the part that broke.
Which part is green or white???
Regards
Jon

gerrybgJul 22, 2005, 11:21 am · #5

I sell 460cc injectors, (same brand as original, nippon denso) for $35 each (Australian) that will fit an FJ20, if you have programmeable ECU. (By the way one of the injectors in the picture on ebay is different to the other 3,hence the description of problems, as he probable is selling them as he can't get the car to run right. Which it never will with that set as I recognize the 4th injector and its got way higher flow than the other 3!!)

But if you wanted 3 spare FJ20ET injectors as backups to your existing ones, $30 would be a bargain!!

VEGIEJul 23, 2005, 7:31 am · #6

the actual body of the injector, is the part with the number moulded into it.
this is the part that will be green/white(ish). just below where the fuel hose connects to it...

so do you need the actual injector, or just the mounting block (the black part)?

pm me your phone number and ill give you a call about it....

JonJul 23, 2005, 9:20 am · #7

Hi Craig
I only need the black mounting base.
My number is 03-3486924 or 021-1436012
Many thanks
Jon

adam666Jul 30, 2005, 9:10 pm · #8

Hey mate, I have some mounting blocks spare if ya want a couple sent down let me know.

No charge

cheers
Adam

oh, betta pm me an addy too :p

JonJul 31, 2005, 12:32 am · #9

Thanks for the offer Adam.
Craig was a gem and sent me down one last week.
Haven't fitted it yet - too busy at work, but the panic should be over in a couple of weeks...
Appreciate your kindness.
Regards
Jon

VEGIEJul 31, 2005, 7:18 am · #10

ha ha, send him another four adam, then he can do an eight injector setup!

adam666Aug 5, 2005, 6:05 am · #11

VEGIEha ha, send him another four adam, then he can do an eight injector setup!

heehee :-)

saw a nice AM alloy intake on yahoo japan a while back with dual injectors bosses - running a std set + a set of 550s.

hmmm, petrol is far too expesive for that sort of extravagence :p

I aquired a stash of em for spares as I machined some to custom fit my 550s, only broke 2 8]

cheers
Adam

VEGIEAug 5, 2005, 9:02 am · #12

ha ha yeah, i was lucky enough that i didnt need the spares as they machined out well on work's mill. im using 560cc evo 7 injectors on mine.